Catalyst Handling is one of the major aspects that requires adequate protection to personnel and environment. This industry requires standard marked sanitary conditions. For this it requires the washing and showering facilities so that dust do not build up. Moreover eating, drinking and smoking is avoided in catalyst handling areas.

The catalyst spills are promptly cleaned and at regular intervals the catalyst handling area is also washed. One should always try to keep the dust generation at the minimum. To achieve this objective, hoses are used; gutters are closed and rate of dumping for vessels/ reactors are adjusted. Too high dumping is avoided because it may result in damaging the catalyst.

Sometimes catalyst handling is also associated with exposure to hazardous substances. It contaminates the air. Both inhalation and skin contact of these substances are injurious to any person. Working in this situation requires protection. Impenetrable gloves are used with long cuffs to overlap the sleeves and special overalls are used to avoid penetration in the work cloths. Apart from these, rubber boots, safety glasses, facemask etc. are used to protect oneself from hazardous substances

The work practices of this industry are to first collect the detailed information about the catalyst to be handled and the associated hazards. Take the manufacturer's product data sheet and/or the Material Safety Data Sheet or equivalent. Then bring out quality plan and prepare accordingly. Avoidance of exposure is management's top priority. Consideration should also be taken about the wind direction of the site, the actual work, mess-tent, sanitary facilities, field office etc.

Ratna consultants assist clients of this industry with overseas job agency in satisfying their various human resources needs. Our key strength is our ability to select and recruit suitable candidate, within a short time, regardless of the location or time.

The welding industry sounds simple but in actual it is not so. Here the welder welds the suitable equipment as per WPS/PQR requirements. WPS is welding procedure specification and PQR is procedure qualification record. This WPS/PQR is passed through welding supervisor, who is responsible for proper execution of welding activities. Proper execution means that documentation is in order, and instructions are adhered to and communicated in a proper manner, the results are documented and transmitted to the responsible engineer.

The WPS is based on code requirements, material, availability of welding equipment, welders qualification, accessibility of area to be welded, etc. The WPS is supported by PQR. Traceability of the PQR to the WPS is to be clear. Here WPS can have several PQR's. Overseas welding jobs selection is based on the qualification and validity of the qualification of the welder. In overseas welding jobs the welder who has welded the test coupon for the compilation of the PQR is qualified for that specific WPS - PQR combination, provided that the test results are acceptable, taking the limitations from the essential variables in consideration. Each welder is assigned with unique number, letter or symbol for identification.

The performance of the welding electrodes largely depend on the handling, storage and preparation prior to use. Manufacturer's recommendations are strictly adhered to, especially for the low hydrogen types. The welding equipment should be in perfect working condition, including the cables and electrode holder or gun. Polarity should also be clearly marked as well as the scale for settings.

We are overseas job placement agency who have been serving welding industry for years. We are extremely successful and reliable in providing welding jobs overseas. We are able to provide the recruiters with the most promising and appropriate candidates who meet the specific demands of the job.